99 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ disclaimer: us.tdk-lambda.com/lp/legal.htm sws600/1000l series features u low cost u low pro? le u active power factor correction u universal input (85 - 265vac) u input transient protected iec61000-4 u low acoustical noise u medical certi? cations (SWS1000L) u global safety approvals u variable speed fan single output low pro? le power supplies model sws600l SWS1000L input voltage range - 85 - 265vac (47 - 63hz) or 120 - 350vdc inrush current (115 / 230vac) a 20 / 40 power factor - meets en61000-3-2 class a input current (100/200vac) a 7.1 / 3.6 (3.3v: 5 / 2.5) 12 / 6 temperature coef? cient - <0.02%/c overcurrent protection - >105%, constant current style overvoltage protection v 125% -145% overtemperature protection - yes, cycle ac or remote on/off to reset hold up time (typ) ms 20ms at 115/230vac leakage current (max) ma <0.75ma 100a at 115vac 60hz(2) remote sense - yes parallel connection - yes remote on/off (cnt) - yes voltage programming (1) - yes dc good & fan fail signal - yes, open collector output auxiliary output - 12v 0.1a led indicator - green led = on operating temperature c -40c start up. -20 to 74c, derating linearly to 50% load above 50c storage temperature c -40 to +85c humidity (non condensing) - 20 - 90% rh operating, 10 - 95%rh non operating cooling - variable speed internal fan withstand voltage(one minute) - input to ground 2 kvac, input to output 3kvac, input to ground 2kvac, input to output 4kvac, output to ground 500vac, output to cnt 100vac o utput to ground 500vac, output to cnt 100vac isolation resistance - >50m at 25c & 70%rh, output to ground 500vdc vibration (non operating) - mil-std-810f 514.5 cat. 4,10 shock (in packaging) - mil-std-810f 516.5 procedure i, vi immunity - en61000-4-2, -3, -4, -5, -6, -8, -11 safety agency certi? cation - ul, csa, en60950-1, ul60601-1 (1000w only), iec61010-1 (600w only), en50178, ce mark conducted & radiated emi - en55011 / en55022-b, fcc class b weight (typ) g 1600 2300 size (wxhxd) in 2.4 x 4.72 x 7.48 2.4 x 5.91 x 9.45 warranty yrs three years (1) 1-6v program voltage input to adjust output 2 0-120% (typical) of nominal. see instruction manua l for details & models with this feature. (2) worst case: <300a at 264vac, 63hz (normal condition); <500a (single fault condition). speci? cations key market segments & applications
100 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision b1: apr 2012 sws600/1000l series for additional information, please visit us.tdk-lambda.com/lp/products/sws-series.htm sws 50 - 300w single output hws 15 - 1800w single output, high reliability zws 5 - 240w pcb style single, output dlp, dpp, dsp 10 - 480w din rail mount ls 25 - 200w single output, low cost notes: (3) 115 / 230vac (4) peak current and power possible at 170-265vac input, 10s max, 35% duty cycle other industrial products max max load line ripple adjust curr. pwr reg reg noise eff.(3) model voltage range (a) (w) (mv) (mv) (mv) (typ)% sws600l-3 3.3v 2.64 - 3.96v 120a 396w 30 20 120 70 / 72 SWS1000L-3 3.3v 2.64 - 3.96v 200a 660w 30 20 120 74 / 76 sws600l-5 5v 4 - 6v 120a 600w 30 20 120 75 / 77 SWS1000L-5 5v 4 - 6v 200a 1000w 30 20 120 79 / 81 sws600l-12 12v 9.6 - 14.4v 53a 636w 72 48 150 79 / 82 SWS1000L-12 12v 9.6 - 14.4v 88a 1056w 72 48 150 82 / 84 sws600l-15 15v 12 - 19.5v 43a 645w 90 60 150 79 / 82 SWS1000L-15 15v 12 - 19.5v 70a 1050w 90 60 150 82 / 84 sws600l-24 24v 19.2 - 28.8v 27a (31a) 4 648w(744w) 144 96 150 81 / 84 SWS1000L-24 24v 19.2 - 28.8v 44a (51a) 4 1056w(1224w) 144 96 150 84 / 86 sws600l-36 36v 28.8 - 43.2v 18a 648w 216 144 200 82 / 84 SWS1000L-36 36v 28.8 - 43.2v 29a 1044w 216 144 200 84 / 86 sws600l-48 48v 38.4 - 56v 13a (15a) 4 624w(720w) 288 192 200 82 / 84 SWS1000L-48 48v 38.4 - 56v 22a (25a) 4 1056w(1200w) 288 192 200 84 / 86 sws600l-60 60v 48 - 66v 10a 600w 360 240 200 82 / 84 SWS1000L-60 60v 48 - 66v 17a 1020w 360 240 200 84 / 86 model selector sws600l outline drawing
|